Power Units For Metallographic Inlay Machine

General Description

This hydraulic power unit is composed ot high pressure gear pump, brushioss DC motor, multi-purpose integrated biock, hydraulic valve, tank and other parts. Providing power for the metallographic sample inlaying machine.

Outline Dimension

Hydraulic circuit optional 102

Model Specifications

Special Notes

1. For different flow rate pump,pressure and motor power,please check the ordering guidance.

2.This is DC brushless motor.

3.Before installation,the cylinder,oil pipe,joint and other hydraulic components must be cleaned and free from any impurities.

4. The viscosity of hydraulic oil should be 15-68cst and should be clean and free of impurities.HM46 hydraulic oil is recommended.

5.Check that whether there is enough oil in the oil tank immediately after the first operating of the system.

6.The hydraulic oil should be replaced after the first 100 hours'use of the system, and change the oil every 3,000 hours after that.