Hydraulic Power Pack For Car Carrier

General Description

This power unit is specially designed for car carrier, it controls multiple double acting oil cylinders working separately.By direction changing of the solenoid valve to achieve the function of the car multi-storey parking space lifting.

Outline Dimension

Hydraulic circuit optional 103

Model Specifications

Special Notes

1. For different fiow rate pump.pressure and motor power,please chect the he ordering guidance.

2. This motor is based on gap working system S2=2 - 4min(continuous working time),so it cannot run continuously.

3. Before installation,the cylinder,oil pipe,joint and other hydraulic components must be cleaned and free from any impurities.

4. The viscosity of hydraulic oil should be 15-68cst and should be clean and free of impurities.HiM46 hydraulic oil is recommended.

5. It you need manual oil discharge device for emergency.please specity when ordering.

6. Check that whether there is enough oil in the oil tank immediately after the first operating of the system.

7. The hydraulic oil should be replaced after the first 100 hours' use of the system, and change the oil every 3,000 hours after that.